Slips and trips are the most common cause of non fatal injuries in UK workplaces, making up around a third of all such injuries reported to the HSE each year. Employers must assess and control slip and trip risks under the Health and Safety at Work Act 1974 and the Management of Health and Safety at Work Regulations 1999, and the good news is that the controls are usually simple and inexpensive. This guide explains the scale of the problem, the law, the causes, and how to prevent slips and trips.
The scale of the problem
According to HSE statistics, slips and trips consistently account for around 30 per cent of all non fatal injuries to employees reported under RIDDOR, making them the single most common cause of workplace injury. They are also a major cause of more serious injuries, including fractures and head injuries, and they frequently trigger falls from height, where a slip or trip at an edge or on stairs leads to a fall. For a small business, a single serious slip can mean lost staff time, a civil claim, higher insurance costs and an HSE investigation, all from a hazard that is usually cheap to fix.
What the law requires
There is no specific slips and trips regulation; the duty comes from general health and safety law. The Health and Safety at Work Act 1974 requires employers to ensure, so far as is reasonably practicable, the health and safety of employees and others affected by their work, which includes customers and visitors. The Management of Health and Safety at Work Regulations 1999 require a suitable and sufficient risk assessment. The Workplace (Health, Safety and Welfare) Regulations 1992 add specific duties on floors and traffic routes, requiring them to be suitable, in good condition, and free from obstructions and from any substance that could cause a person to slip.
Common causes in different workplaces
Most slips and trips come from a small set of recurring causes, which makes them very preventable once you know what to look for:
- Contamination: water, oil, grease, food, dust, leaves or other substances on the floor.
- Obstacles: trailing cables, deliveries left in walkways, clutter, and curled or unsuitable mats.
- Flooring: unsuitable or worn floor surfaces, sudden changes in level, and floors that become slippery when wet.
- Footwear: inappropriate or worn footwear, especially in wet, oily or food preparation areas.
- Environment: poor lighting, glare, or anything that distracts attention or hides a hazard.
- Stairs and steps: missing handrails, poor lighting and uneven or damaged treads.
The slip potential model
The HSE uses a slip potential model to show that slips usually result from several factors combining rather than from a single cause. The factors include the flooring, contamination, footwear, the environment, the task being carried out, and human behaviour. The practical lesson is that addressing only one factor in isolation rarely solves the problem. For example, a slip resistant floor will still cause slips if it is regularly contaminated and not cleaned properly, or if staff wear unsuitable footwear. Effective control looks at all the factors together and tackles the ones most relevant to your workplace.
Practical prevention measures
Most slip and trip controls are straightforward and low cost. Stop floors from becoming contaminated in the first place where you can, and clean up spills immediately using the right method and equipment. Keep walkways and stairways clear, deal with trailing cables, and provide suitable mats at entrances to manage water in wet weather. Maintain good lighting throughout, choose suitable flooring and footwear for the environment, and use clear signage for any hazard that cannot be removed straight away. Good housekeeping is the single most effective measure, and a culture where staff report and deal with hazards promptly prevents many incidents.
Cleaning done safely
Cleaning is a common cause of slips as well as a control for them, because a wet floor left without warning is a hazard in itself. Cleaning should be planned so that floors are not left wet where people walk, using methods that dry quickly or sectioning off areas while they dry. The right cleaning product and dilution matter, as the wrong approach can leave a residue that makes a floor more slippery. Warning signs should be used while floors are wet but removed promptly once dry, so that they retain their meaning rather than becoming permanent fixtures people ignore.
Reporting near misses
Many slips and trips are preceded by near misses, where someone slips but recovers, or notices a hazard before anyone is hurt. Encouraging staff to report these near misses, and acting on them, is one of the most effective ways to prevent actual injuries. A simple, blame free reporting process helps catch hazards such as a recurring leak, a worn floor or a poorly placed delivery point before they cause harm. Recording and reviewing these reports also helps identify patterns that point to an underlying problem.
Training requirements
While there is no standalone legal requirement to provide slips and trips training, employers must give staff adequate information, instruction and training to work safely, which includes awareness of slip and trip risks and the part each person plays in prevention. Awareness training helps staff spot and report hazards, clean up correctly, wear suitable footwear, and understand why good housekeeping matters. In higher risk environments such as kitchens, this awareness is especially important and should be reinforced regularly.
Frequently asked questions
- How many workplace accidents are caused by slips and trips: Around 30 per cent of non fatal injuries to employees reported to the HSE are caused by slips and trips, making them the most common cause.
- Is slip and trip training a legal requirement: There is no specific requirement, but employers must provide adequate information and training to work safely, which includes slip and trip awareness.
- What are the most common causes of slips in the workplace: Floor contamination such as water or oil, obstacles like trailing cables, unsuitable flooring and footwear, and poor lighting.
- How do I do a slips and trips risk assessment: Identify the hazards, consider who could be harmed, evaluate the factors in the slip potential model, put controls in place, and review regularly.
- Why is housekeeping so important for preventing slips and trips: Good housekeeping removes contamination and obstacles, the two most common causes, and is usually the simplest and cheapest control.
- Should near misses be recorded: Yes. Recording and acting on near misses is one of the most effective ways to prevent actual injuries.
Featherstone Safety Hub lets you record slip and trip hazards and near misses in its incident register with built in RIDDOR screening, and includes a slips, trips and falls awareness course in its awareness training library on the Complete plan.
Start your free 14 day trial of Featherstone Safety Hub.
Get on top of slips, trips and falls
The most common cause of workplace injury starts with a risk assessment. Featherstone Safety Hub helps you assess and control slip, trip and fall risks and keep the evidence. Start a free 14-day trial →
