Training guides

Working at Height: UK Regulations and Training Guide

The Work at Height Regulations 2005 apply to all work where a person could fall a distance liable to cause injury. UK employers must plan, supervise and carry out such work safely, use the right equipment, and ensure workers are competent. Falls from height remain one of the most common causes of fatal and serious workplace injury in Great Britain, and the HSE reports they are consistently among the leading causes of workplace deaths each year.

Why working at height is so high risk

Falls from height cause a disproportionate share of serious and fatal workplace injuries. What makes the risk particularly important to manage is that many incidents happen during short, routine tasks, and many falls are from relatively low heights such as ladders, vehicles and platforms, not just from roofs or scaffolds. The consequences of a fall can be life changing or fatal even from a modest height, which is why the law treats all work at height seriously rather than focusing only on obviously dangerous tasks.

What counts as working at height

Working at height means working anywhere a person could fall and be injured. This includes working above ground level, working at ground level near an opening or edge through which a person could fall, and gaining access to or leaving a place of work where there is a risk of a fall. It is not defined by a minimum height. Using a stepladder to change a light, working on a flat roof, loading or unloading a lorry, and working near an unguarded edge or opening all count. This breadth is widely misunderstood, which is why many serious falls happen during tasks people did not think of as working at height.

The hierarchy of control

The Work at Height Regulations 2005 set out a clear order of priority for managing the risk, and employers must work through it in sequence rather than jumping to the easiest option:

  • Avoid: do not work at height at all if it is reasonably practicable to do the work another way, for example using long handled tools from the ground.
  • Prevent: where work at height is necessary, use an existing safe place of work or collective protection such as guard rails, working platforms and tower scaffolds.
  • Minimise: where the risk of a fall still remains, use equipment to minimise the distance and consequences of a fall, such as nets or airbags, with personal fall protection as a last resort.

Collective measures that protect everyone, such as guard rails, are always preferred over personal measures that protect only one person and rely on correct use.

Who needs training

Anyone who works at height, or who organises or supervises it, must be competent. Competence means having the training, skills, knowledge and experience for the task, or working under the supervision of someone who has. The level of training depends on the work. Basic awareness is enough for occasional, low risk tasks such as using a stepladder, while thorough, equipment specific training is needed for scaffolding, mobile access towers, mobile elevating work platforms and rope access. Supervisors and those planning the work also need the knowledge to do so safely.

Ladders: the most misunderstood risk

Ladders and stepladders are not banned, despite a common myth, and they remain sensible for short duration, low risk tasks. The key is suitability. A ladder should be used only where a risk assessment shows that more substantial equipment is not justified, for light work of short duration, on firm and level ground, with the ladder secured and three points of contact maintained. Many ladder injuries result from overreaching, using unsuitable or damaged ladders, failing to secure the ladder, or using a ladder for a task that really needed a tower or platform. Pre use checks for damage should be routine.

Common work at height equipment

Beyond ladders, the main types of access equipment each have their place. Tower scaffolds provide a stable platform for longer tasks but must be erected, used and dismantled correctly by trained people. Mobile elevating work platforms, such as scissor lifts and cherry pickers, suit higher or harder to reach work and require trained operators. Fixed scaffolding is used for larger or longer projects and must be erected by competent scaffolders and inspected regularly. Choosing the right equipment for the task is itself part of managing the risk.

Fragile surfaces and roof work

Fragile surfaces are a particular danger and a frequent cause of fatal falls. Roof lights, asbestos cement sheets, liner panels and corroded metal can give way under a person's weight. Work on or near fragile surfaces needs careful planning, clear identification of the fragile areas, and controls such as platforms, covers, guard rails and warning signage. Roof work in general is high risk and should be planned thoroughly, with access, edge protection and weather conditions all considered.

Permit to work for high risk tasks

For higher risk work at height, a permit to work system adds a formal layer of control. It ensures the work is properly planned and authorised, that the correct precautions are confirmed to be in place before work starts, and that the area is controlled while the work is carried out. Permits are commonly used for work on fragile roofs, complex access situations and work near live hazards. They create an auditable record that the right checks were completed, which is valuable both for safety and for demonstrating compliance.

Planning and risk assessment

Every work at height task should be planned and risk assessed before it begins. The assessment should consider whether the work can be avoided, the equipment needed, the competence of those involved, the condition of surfaces and access, the weather where relevant, and emergency and rescue arrangements. Rescue planning is often overlooked. If someone falls and is left suspended in a harness, there must be a plan to recover them quickly, because prolonged suspension is itself dangerous.

Frequently asked questions

  • What counts as working at height under UK law: Any work where a person could fall a distance liable to cause injury, including at or below ground level near edges and openings. There is no minimum height.
  • Is working at height training a legal requirement: Workers and supervisors must be competent, which in practice means trained or supervised by a competent person, under the Work at Height Regulations 2005.
  • Can anyone use a ladder at work: Ladders may be used for short, low risk tasks by a competent person, but only where a risk assessment shows that more substantial equipment is not needed.
  • Do I need a permit to work for work at height: Not always, but a permit to work is good practice for higher risk work such as fragile roofs or complex access.
  • Are ladders banned at work: No. This is a common myth. Ladders are permitted for suitable short duration, low risk tasks.
  • What should a work at height risk assessment cover: Whether the work can be avoided, the equipment needed, competence, surface and access conditions, weather, and rescue arrangements.

Featherstone Safety Hub's Permit to Work module (Professional plan and above) manages working at height permits with a full approval workflow, and its awareness training library on the Complete plan includes a working at height course.

Start your free 14 day trial of Featherstone Safety Hub.


Assess work at height in one place

Featherstone Safety Hub is risk assessment software for UK businesses — build, score and review your working-at-height risk assessment with a built-in matrix and keep the records. Start a free 14-day trial →

Planning work at height as part of a larger engineering or installation project? See infrastructure and engineering health and safety advisory.

This guide gives general information about UK health and safety law. It is not legal advice, and duties remain with the employer and other dutyholders.

Want this handled for your business?

Featherstone Safety gives small businesses across Oxfordshire and the Cotswolds practical, proportionate health and safety support. Compliance reviews start from £395, with the scope and price confirmed in writing first.

See our consultancy services

Prefer to run it yourself? Featherstone Safety Hub keeps your risk assessments, training records and actions in one place from £49 a month per site, with a 14-day free trial.